DDR4 G.SKILL Trident Z RGB 4600MHz 64GB - F4-4600C20D-64GTZR (KIT 2DB)

Memory Type

DDR4

Capacity

64GB (32GBx2)

Multi-Channel Kit

Dual Channel Kit

Tested Speed (XMP/EXPO)

4600 MT/s

Tested Latency (XMP/EXPO)

20-30-30-50

Tested Voltage (XMP/EXPO)

1.55V

Registered/Unbuffered

Unbuffered

Error Checking

Non-ECC

SPD Speed (Default)

2666 MT/s

SPD Voltage (Default)

1.20V

Fan Included

No

Warranty

Limited Lifetime

Features

Intel XMP 2.0 (Extreme Memory Profile) Ready

Additional Notes

• If used with 11th Gen Intel Core non-K processors, DDR4-4600 is not supported, so memory frequency may be limited to DDR4-4533 or lower when XMP is enabled.
• Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure.
• Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware.
• For memory kits with XMP, enable XMP/DOCP/A-XMP profile in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware. Please refer to the "How to Enable XMP/EXPO" guide.
• Reaching the rated XMP overclock speed and system stability will depend on the compatibility and capability of the motherboard and CPU used.
• Usage in any manner inconsistent with manufacturer specifications, warnings, designs, or recommendations will result in lower speeds, system instability, or damage to the system or its components.
• Memory module height can be found in the FAQ, under the question "How tall are the memory modules?".
• For product support and related questions, please contact the G.SKILL technical support team via email.