Notebook DDR3 Kingston 1333MHz 4GB CL9

Memória kapacitás	4 GB
Órajel	1333 MHz
Kiszerelés	Single (1db)
Hűtőborda	Nincs
Hűtőborda színe	Nincs borda
Időzítés	CL9

FEATURES
• JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
• VDDQ = 1.5V (1.425V ~ 1.575V)
• 667MHz fCK for 1333Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 9, 8, 7, 6
• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
• Programmable CAS Write Latency(CWL) = 7 (DDR3-1333)
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with
starting address “000” only), 4 with tCCD = 4 which does not
allow seamless read or write [either on the fly using A12 or
MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration : Internal self calibration through ZQ
pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C,
3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• PCB: Height 1.18” (30mm), double sided component
Document No. VALUERAM0908-001.B00 09/06/11 Page 1
Memory Module Specifi cations
*Power will vary depending on the SDRAM used.
SPECIFICATIONS
CL(IDD) 9 cycles
Row Cycle Time (tRCmin) 49.5ns (min.)
Refresh to Active/Refresh 160ns (min.)
Command Time (tRFCmin)
Row Active Time (tRASmin) 36ns (min.)
Power (Operating) 1.410 W*
UL Rating 94 V - 0
Operating Temperature 0o C to 85o C
Storage Temperature -55o C to +100o C

Írjon véleményt a(z) Notebook DDR3 Kingston 1333MHz 4GB CL9 termékről!

Termék értékelése *

Termék előnyei

Termék hátrányai

Összegzés *

Megjelenítendő név

Vélemény belküldése